Letter from H. S. LeCompte

Letter concerning a position in the music department at the Agricultural College

Applicant for teacher of vocal music.

Business card for H. S. Hibbere LeCompte

Simultaneous capacitive probe and planar laser-induced fluorescence measurements in downwards gas-liquid annular flow

Various experimental techniques are available to analyse two-phase flows. The measurement concept and the applicability can however vary greatly. Prime examples from the opposite spectrum are planar laser-induced measurements (PLIF) versus capacitive probes. PLIF is an optical technique, it is non-intrusive but optical access is necessary. PLIF based measurements are known for their high temporal and spatial resolution but require a costly set-up. In contrast, the capacitive probe is another non-intrusive technique but doesn’t require optical access. It is fairly easy to set up, robust, and is cheap to construct. To rigorously compare both techniques, simultaneous PLIF and capacitive probe measurements are made in this work. As the void fraction is one of the key parameters to classify flow regimes, both techniques are compared on the determination of the void fraction. This is done for a limited set of six annular flows. The experiments were performed in a downward annular-flow facility with demineralized water - air as working medium. The first results indicate that both techniques give similar volume averaged void fractions. The mean absolute percentage error and the maximum relative error between both techniques are 0.30% and 0.54%, respectively. The PLIF measurements confirm however to have a better spatial resolution

Constraining compressed supersymmetry using leptonic signatures

We study the impact of the multi-lepton searches at the LHC on supersymmetric models with compressed mass spectra. For such models the acceptances of the usual search strategies are significantly reduced due to requirement of large effective mass and missing E_T. On the other hand, lepton searches do have much lower thresholds for missing E_T and p_T of the final state objects. Therefore, if a model with a compressed mass spectrum allows for multi-lepton final states, one could derive constraints using multi-lepton searches. For a class of simplified models we study the exclusion limits using ATLAS multi-lepton search analyses for the final states containing 2-4 electrons or muons with a total integrated luminosity of 1-2/fb at \sqrt{s}=7 TeV. We also modify those analyses by imposing additional cuts, so that their sensitivity to compressed supersymmetric models increase. Using the original and modified analyses, we show that the exclusion limits can be competitive with jet plus missing E_T searches, providing exclusion limits up to gluino masses of 1 TeV. We also analyse the efficiencies for several classes of events coming from different intermediate state particles. This allows us to assess exclusion limits in similar class of models with different cross sections and branching ratios without requiring a Monte Carlo simulation.Comment: 18 pages, 5 figure

Summary of the Very Large Hadron Collider Physics and Detector Workshop

One of the options for an accelerator beyond the LHC is a hadron collider with higher energy. Work is going on to explore accelerator technologies that would make such a machine feasible. This workshop concentrated on the physics and detector issues associated with a hadron collider with an energy in the center of mass of the order of 100 to 200 TeV

Thermal performance of fly ash geopolymeric mortars containing phase change materials

This paper reports experimental results on the thermal performance of fly ash-based  geopolymeric mortars containing different percentages of phase change materials  (PCMs). These materials have a twofold eco-efficient positive impact. On one hand,  the geopolymeric mortar is based on industrial waste material. And on the other  hand, the mortars with PCM have the capacity to enhance the thermal performance  of the buildings. Several geopolymeric mortars with different PCM percentages  (10%, 20%, 30%) were studied for thermal conductivity and thermal energy storageinfo:eu-repo/semantics/publishedVersio

Supersymmetry in the shadow of photini

Additional neutral gauge fermions -- "photini" -- arise in string compactifications as superpartners of U(1) gauge fields. Unlike their vector counterparts, the photini can acquire weak-scale masses from soft SUSY breaking and lead to observable signatures at the LHC through mass mixing with the bino. In this work we investigate the collider consequences of adding photini to the neutralino sector of the MSSM. Relatively large mixing of one or more photini with the bino can lead to prompt decays of the lightest ordinary supersymmetric particle; these extra cascades transfer most of the energy of SUSY decay chains into Standard Model particles, diminishing the power of missing energy as an experimental handle for signal discrimination. We demonstrate that the missing energy in SUSY events with photini is reduced dramatically for supersymmetric spectra with MSSM neutralinos near the weak scale, and study the effects on limits set by the leading hadronic SUSY searches at ATLAS and CMS. We find that in the presence of even one light photino the limits on squark masses from hadronic searches can be reduced by 400 GeV, with comparable (though more modest) reduction of gluino mass limits. We also consider potential discovery channels such as dilepton and multilepton searches, which remain sensitive to SUSY spectra with photini and can provide an unexpected route to the discovery of supersymmetry. Although presented in the context of photini, our results apply in general to theories in which additional light neutral fermions mix with MSSM gauginos.Comment: 23 pages, 8 figures, references adde

Experimental Investigation of the Operating Point of a 1-kW ORC System

The organic Rankine cycle (ORC) is a promising technology for the conversion of waste heat from industrial processes as well as heat from renewable sources. Many efforts have been channeled towards maximizing the thermodynamic potential of ORC systems through the selection of working fluids and the optimal choice of operating parameters with the aim of improving overall system designs, and the selection and further development of key components. Nevertheless, experimental work has typically lagged behind modelling efforts. In this paper, we present results from tests on a small-scale (1 kWel) ORC engine consisting of a rotary-vane pump, a brazed-plate evaporator and a brazed-plate condenser, a scroll expander with a built-in volume ratio of 3.5, and using R245fa as the working fluid. An electric oil-heater acted as the heat source, providing hot oil at temperatures in the range 120-140°C. The frequency of the expander was not imposed by an inverter or the electricity grid but depended directly on the attached generator load; both the electrical load on the generator and the pump rotational speed were varied in order to investigate the performance of the system. Based on the generated data, this paper explores the relationship between the operating conditions of the ORC engine and changes in the heat-source temperature, pump and expander speeds leading to working fluid flow rates between 0.0088 kg/s and 0.0337 kg/s, from which performance maps are derived. The experimental data is, in turn, used to assess the performance of both the individual components and of the system, with the help of an exergy analysis. In particular, the exergy analysis indicates that the expander accounts for the second highest loss in the system. Analysis of the results suggests that increased heat-source temperatures, working-fluid flow rates, higher pressure ratios and larger generator loads improve the overall cycle efficiency. Specifically, a 46% increase in pressure ratio from 2.4 to 4.4 allowed a 3-fold electrical power output increase from 180 W to 550 W, and an increase in the thermal efficiency of the ORC engine from 1 to 4%. Beyond reporting on important lessons learned in improving the performance of the system under consideration, comparisons will be shown for making proper choices with respect to the interplay between heat-source temperature, generator load, and pump speed in an ORC system

Reduction of seafood processing wastewater using technologies enhanced by swim–bed technology

The increasing growth of the seafood processing industries considerably requires more industrial process activities and water consumption. It is estimated that approximately 10–40 m3 of wastewater is generated from those industries for processing one-tonne of raw materials. Due to limitations and regulations in natural resources utilization, a suitable and systematic wastewater treatment plant is very important to meet rigorous discharge standards. As a result of food waste biodegradability, the biological treatment and some extent of swim-bed technology, including a novel acryl-fibre (biofilm) material might be used effectively to meet the effluent discharge criteria. This chapter aims to develop understanding on current problems and production of the seafood wastewater regarding treatment efficiency and methods of treatment

Prospects for Searching for Excited Leptons during RunII of the Fermilab Tevatron

This letter presents a study of prospects of searching for excited leptons during RunII of the Fermilab Tevatron. We concentrate on single and pair production of excited electrons in the photonic decay channel in one CDF/DO detector equivalent for 2 fb^{-1}. By the end of RunIIa, the limits should be easily extended beyond those set by LEP and HERA for excited leptons with mass above about 190 GeV.Comment: 4 pages, 8 figure